Source[1|2]]:burst:tdelay, Source[1|2]]:burst:tdelay -44 – Tektronix AFG3000 User Manual

Page 118

Text mode
Original mode

Syntax and Commands

3-44

AFG3000 Series Arbitrary/Function Generators Reference Manual

[SOURce[1|2]]:BURSt:TDELay

This command sets or queries delay time in the burst mode for the specified
channel. It specifies a time delay between the trigger and the signal output. This
command is available only in the Triggered burst mode.

Group

Source

Syntax

[SOURce[1|2]]:BURSt:TDELay {|MINimum|MAXimum}

[SOURce[1|2]]:BURSt:TDELay?{MINimum|MAXimum}

Arguments

::=[]
where
::=[s | ms |

µs | ns]

MINimum sets the delay time to minimum value.

MAXimum sets the delay time to maximum value.

Returns

Examples

SOURce1:BURSt:DELay 20ms
sets the CH 1 delay time to 20 ms.