Source[1|2]]:voltage[:level][:immediate]:high, Source[1|2]]:voltage[:level][:immediate]:high -82 – Tektronix AFG3000 User Manual

Page 156

Text mode
Original mode

Syntax and Commands

3-82

AFG3000 Series Arbitrary/Function Generators Reference Manual

[SOURce[1|2]]:VOLTage[:LEVel][:IMMediate]:HIGH

This command sets or queries the high level of output amplitude for the specified
channel. If your instrument is a dual-channel model and the
[SOURce[1|2]]:VOLTage:CONCurrent[:STATe] command is set to ON, then the
high level of other channel is also the same value.

Group

Source

Related Commands

[SOURce[1|2]]:VOLTage:CONCurrent[:STATe]

Syntax

[SOURce[1|2]]:VOLTage[:LEVel][:IMMediate]:HIGH {|MINimum
|MAXimum}

[SOURce[1|2]]:VOLTage[:LEVel][:IMMediate]:HIGH?{MINimum|MAXimum}

Arguments

::=[]
where
is the high level of output amplitude.
::=[mV | V]

Returns

Examples

SOURce1:VOLTage:LEVel:IMMediate:HIGH 1V
sets the high level of CH 1 output amplitude to 1 V.