Tektronix AFG3000 - Manual (Page 130)

Syntax and Commands
3-56 AFG3000 Series Arbitrary/Function Generators Reference Manual
[SOURce[1|2]]:FSKey[:FREQuency]
This command sets or queries the hop frequency of FSK modulation for the spec-
ified channel.
Group Source
Syntax [SOURce[1|2]]:FSKey[:FREQuency] {|MINimum|MAXimum}
[SOURce[1|2]]:FSKey[:FREQuency]? {MINimum|MAXimum}
Arguments ::=[]
where
is the hop frequency.
::=[Hz | kHz | MHz]
Returns
Examples SOURce1:FSKey:FREQuency 1.0MHz
sets the hop frequency of CH 1 FSK modulation to 1.0 MHz.
[SOURce[1|2]]:FSKey:INTernal:RATE
This command sets or queries the internal modulation rate of FSK modulation for
the specified channel. You can use this command only when the internal modula-
tion source is selected.
Group Source
Syntax [SOURce[1|2]]:FSKey:INTernal:RATE {|MINimum|MAXimum}
[SOURce[1|2]]:FSKey:INTernal:RATE?[MINimum|MAXimum]
Arguments ::=[]
where
is the modulation rate.
::=[Hz | kHz | MHz]
Returns
Examples SOURce1:FSKey:INTernal:RATE 50Hz
sets the CH 1 internal modulation rate to 50 Hz.