Tektronix AFG3000 - Manual (Page 124)

Syntax and Commands
3-50 AFG3000 Series Arbitrary/Function Generators Reference Manual
[SOURce[1|2]]:FREQuency:CONCurrent[:STATe]
This command enables or disables the function to copy the frequency (or period)
of one channel to another channel.
The[SOURce[1|2]]:FREQuency:CONCurrent command copies the frequency (or
period) of the channel specified by the header suffix to another channel. If you
specify CH 1 with the header, the CH 1 frequency will be copied to CH 2.
The[SOURce[1|2]]:FREQuency:CONCurrent? command returns “0” (off) or “1”
(on).
If your arbitrary/function generator is single-channel model, this command is not
supported.
Group Source
Syntax [SOURce[1|2]]:FREQuency:CONCurrent {ON|OFF|}
[SOURce[1|2]]:FREQuency:CONCurrent?
Arguments ON or
≠0 enables the concurrent copy function.
OFF or =0 disables the concurrent copy function.
Returns
Examples SOURce1:FREQuency:CONCurrent ON
copies the frequency value of CH 1 to CH 2.