Source[1|2]]:am:internal:frequency, Source[1|2]]:am:internal:frequency -38 – Tektronix AFG3000 User Manual

Page 112

Text mode
Original mode

Syntax and Commands

3-38

AFG3000 Series Arbitrary/Function Generators Reference Manual

[SOURce[1|2]]:AM:INTernal:FREQuency

This command sets or queries the internal modulation frequency of AM modula-
tion for the specified channel. You can use this command only when the internal
modulation source is selected.

You can select the source of modulating signal by using the
[SOURce[1|2]]:AM:SOURce [INTernal|EXTernal] command.

Group

Source

Related Commands

[SOURce[1|2]]:AM:SOURce

Syntax

[SOURce[1|2]]:AM:INTernal:FREQuency{|MINimum|MAXimum}

[SOURce[1|2]]:AM:INTernal:FREQuency?[MINimum|MAXimum]

Arguments

::=[]
where
is the modulation frequency.
::=[Hz | kHz | MHz]

Returns

Examples

SOURce1:AM:INTernal:FREQuency 10kHz
sets the CH 1 internal modulation frequency to 10 kHz.