Tascam GigaStudio - Manual (Page 48)

48 TASCAM GigaEditor 4 Manual
7. To make the new Staccato samples sound when the Mod Wheel is pushed up, leave the upper Mod
Wheel split selected while dragging the Staccato samples into the appropriate Velocity splits:
This gives us a fully two-dimensional region. You can switch between the loud and soft samples by playing
harder or more softly on the keyboard, and at the same time, you can switch between the Sustain and
Staccato samples by moving the Mod Wheel.
8. To hear the results of this new dimension, click on the Download button
again. This will save the new changes and load the instrument.
Changing the Order of Dimension Splits
You might decide that you’d rather hear the Staccato samples, instead of the Sustain samples, when the
Mod Wheel is in the lower part of its range. Fortunately, you can easily change the order of the splits in
any dimension, even after they have been mapped to samples.
1. Right now, in the Mod Wheel dimension split, the Sustain
samples are on the left (Mod Wheel down) and the Staccato
samples are on the right (Mod Wheel up).
2. Click on the Mod
Wheel dimension’s
header to bring up the
Dimension Controller
dialog.
Highlight the “Sustain”
split.