Tascam GigaStudio User Manual
Page 166
166
TASCAM GigaEditor 4 Manual
Because editing individual crossfade points is tedious and must usually be coordinated with the crossfades
in adjacent layers, a graphical Crossfade Editor is provided. You can launch the Crossfade Editor (pictured
below) by clicking the “...” button that appears in the parameter value box when any of the crossfade
parameters is highlighted.
Channel offset
This setting determines which DSP mixer channel the sample will be routed to when the instrument is
loaded in GigaStudio.
For example, when an instrument is assigned to inputs 1-2 in the mixer:
•
Samples with an offset of 0 (the default) will be routed to channels 1-2
•
Samples with an offset of 2 will be routed to channels 3-4
•
Samples with an offset of 3 will be routed to channels 4-5
•
Samples with an offset of 4 will be routed to channels 5-6
•
Etc.
Sample start offset
Th e sample offset is used to start playback at a point after the beginning of the sample. Th e value is
measured in samples and has maximum of 2000.
This is useful to soften the attack of a sample or if there is a pop at the beginning of a sample.
Th e Sample Start Offset is also viewable and adjustable in the Waveform View (the blue marker):