Tascam GigaStudio - Manual (Page 152)

152 TASCAM GigaEditor 4 Manual
Decay 2 Time (sec)
Th e Decay 2 Time is measured in seconds (0.000-60.000) or is set to “Infinite” which overrides the time
setting.
This parameter determines how long the Sustain section of the envelope will last. A Decay 2 Time will
cause the sample level to sustain for that amount of time and then go into the release, even without letting
go of the note. Checking the “Infinite” check box will cause the sample level to sustain indefinitely until
you release the note.
Release time (sec)
Th e Release Time is measured in seconds (0.000-60.000).
This parameter determines how long it will take for the sample volume to ramp down depending on how
Decay 2 is set.
If the Decay 2 is set to “Infinite”, the release will kick in when the note is released.
If the Decay 2 is set to a specific amount of time, then the release will kick in after that amount of time or
when you release the note, whichever comes first.
Envelope Modulation Settings
Th e Modulation settings allow real-time MIDI control of the Attack, Decay and Release of the Amplitude
and Filter Envelopes.
Modulation source
Choose the MIDI controller to use from the list of standard MIDI controllers.
Modulation invert
Reverses the action of the MIDI controller when set to “Yes”.
Attack/Decay/Release modulation depth
Th e response of these individual parameters is set here.