Tascam GigaStudio - Manual (Page 157)

TASCAM GigaEditor 4 Manual 157
Cutoff frequency
This sets the maximum filter cutoff frequency. Th e range is 0-127.
This parameter is only available if the Cutoff Controller is set to “None”.
Cutoff controller
Instead of setting a fixed cutoff frequency, this parameter allows you to assign a MIDI controller to the
Cutoff Frequency for real-time continuous control. This overrides the Cutoff Frequency setting, which will
be disabled once you assign a MIDI controller here.
Control invert
When set to “Yes”, inverts the response of the Cutoff controller.
Minimum cutoff
Places a limit on the lowest filter cutoff frequency when using MIDI cutoff controller. Th e low range of the
MIDI controller will start with this value.
Range is 0-127.