Texas Instruments TMS320TCI6486 - Manual (Page 74)

EMIC Module Registers www.ti.com
3.3 TPIC Registers
3.3.1 TPCFG Registers
There are eight TPCFG registers (TPCFG0 through TPCFG7), one per transmit event. This register
configuration is common to all C64x+ megamodules. The TPCFG register details are shown in
Figure 26
and described in Table 19 .
Figure 26. TPCFG Register
31 28 27 16
Reserved TIME_CFG
0000 R/W-0000 0000
15 8 7 4 3 2 1 0
CNT_CFG Reserved TU CU TR CR
R/W-0000 0000 0000 R/W-0 R/W-0 R/W-0 R/W-0
LEGEND: R/W = Read/Write; R = Read only; -n = value after reset
Table 19. TPCFG Register Field Descriptions
Bit Field Value Description
31-28 Reserved Reserved
27-16 TIME_CFG Time delay configuration value
15-8 CNT_CFG Divide by N configuration value
7-4 Reserved Reserved
3 TU Write-only bit; reads return 0
0 N/A
1 Enables writes to TIME_CFG
2 CU Write-only bit; reads return 0
0 N/A
1 Enables writes to CNT_CFG
1 TR Write-only bit; reads return 0
0 N/A
1 Resets the timer counter
0 CR Write-only bit; reads return 0
0 N/A
1 Resets the divide by N count
74 C6472/TCI6486 EMAC/MDIO SPRUEF8F – March 2006 – Revised November 2010
Submit Documentation Feedback
Copyright © 2006–2010, Texas Instruments Incorporated