Texas Instruments TMS320TCI6486 - Manual (Page 106)

EMAC Port Registers www.ti.com
5.12 MAC End-of-Interrupt Vector Register (MACEOIVECTOR)
The MAC end-of-interrupt vector register (MACEOIVECTOR) is shown in Figure 54 and described in
Table 48 .
Figure 54. MAC End-of-Interrupt Vector Register (MACEOIVECTOR)
31 5 4 0
Reserved MAC_EOI_VECTOR
R-0 R/W-0
LEGEND: R/W = Read/Write; R = Read only; -n = value after reset
Table 48. MAC End-of-Interrupt Vector Register (MACEOIVECTOR) Field Descriptions
Bit Field Value Description
31-5 Reserved 0 Reserved
4 MAC_EOI_VECTOR MAC end-of-interrupt vector
The EOI_VECTOR[4:0] pins reflect the value written to this location one peripheral bus clock
cycle after a write to this location. The EOI_WR signal is asserted for a single clock cycle after
a latency of two peripheral bus clock cycles when a write is performed to this location.
106 C6472/TCI6486 EMAC/MDIO SPRUEF8F – March 2006 – Revised November 2010
Submit Documentation Feedback
Copyright © 2006–2010, Texas Instruments Incorporated