Texas Instruments TMS320TCI6486 - Manual (Page 103)

www.ti.com EMAC Port Registers
5.9 Transmit Interrupt Mask Set Register (TXINTMASKSET)
The transmit interrupt mask set register (TXINTMASKSET) is shown in Figure 51 and described in
Table 45 .
Figure 51. Transmit Interrupt Mask Set Register (TXINTMASKSET)
31 24
Reserved
R-0
23 22 21 20 19 18 17 16
TX7PULSE TX6PULSE TX5PULSE TX4PULSE TX3PULSE TX2PULSE TX1PULSE TX0PULSE
MASK MASK MASK MASK MASK MASK MASK MASK
15 8
Reserved
R-0
7 6 5 4 3 2 1 0
TX7PEND TX6PEND TX5PEND TX4PEND TX3PEND TX2PEND TX1PEND TX0PEND
MASK MASK MASK MASK MASK MASK MASK MASK
LEGEND: R/W = Read/Write; R = Read only; -n = value after reset
Table 45. Transmit Interrupt Mask Set Register (TXINTMASKSET) Field Descriptions
Bit Field Value Description
31-24 Reserved 0 Reserved; read as 0.
23 TX7PULSEMASK 0 Transmit channel 7 pulse interrupt mask. Write 1 to enable interrupt.
22 TX6PULSEMASK 0 Transmit channel 6 pulse interrupt mask. Write 1 to enable interrupt.
21 TX5PULSEMASK 0 Transmit channel 5 pulse interrupt mask. Write 1 to enable interrupt.
20 TX4PULSEMASK 0 Transmit channel 4 pulse interrupt mask. Write 1 to enable interrupt.
19 TX3PULSEMASK 0 Transmit channel 3 pulse interrupt mask. Write 1 to enable interrupt.
18 TX2PULSEMASK 0 Transmit channel 2 pulse interrupt mask. Write 1 to enable interrupt.
17 TX1PULSEMASK 0 Transmit channel 1 pulse interrupt mask. Write 1 to enable interrupt.
16 TX0PULSEMASK 0 Transmit channel 0 pulse interrupt mask. Write 1 to enable interrupt.
15-8 Reserved 0 Reserved; read as 0.
7 TX7PENDMASK 0 Transmit channel 7 pending interrupt mask. Write 1 to enable interrupt.
6 TX6PENDMASK 0 Transmit channel 6 pending interrupt mask. Write 1 to enable interrupt.
5 TX5PENDMASK 0 Transmit channel 5 pending interrupt mask. Write 1 to enable interrupt.
4 TX4PENDMASK 0 Transmit channel 4 pending interrupt mask. Write 1 to enable interrupt.
3 TX3PENDMASK 0 Transmit channel 3 pending interrupt mask. Write 1 to enable interrupt.
2 TX2PENDMASK 0 Transmit channel 2 pending interrupt mask. Write 1 to enable interrupt.
1 TX1PENDMASK 0 Transmit channel 1 pending interrupt mask. Write 1 to enable interrupt.
0 TX0PENDMASK 0 Transmit channel 0 pending interrupt mask. Write 1 to enable interrupt.
103 SPRUEF8F – March 2006 – Revised November 2010 C6472/TCI6486 EMAC/MDIO
Submit Documentation Feedback
Copyright © 2006–2010, Texas Instruments Incorporated