Texas Instruments MSP50C6xx - Manual (Page 352)

C– – Efficiency
5-56
writeCharacter(’ ’);
break;
case 1:
writeCharacter(’ ’);
writeCharacter(’(’);
rowOne();
for(temp=0; temp<17; temp++) writeCharacter(’ ’);
writeCharacter(’o’);
break;
case 2:
writeCharacter(’ ’);
writeCharacter(’|’);
rowOne();
for(temp=0; temp<16; temp++) writeCharacter(’ ’);
writeCharacter(’o’);
writeCharacter(’ ’);
break;
case 3:
writeCharacter(’ ’);
writeCharacter(’)’);
rowOne();
for(temp=0; temp<15; temp++) writeCharacter(’ ’);
writeCharacter(’o’);
writeCharacter(’ ’);
writeCharacter(’ ’);
break;
}
rowOne();
}
setTime() was also modified to place an indicator on the LCD below the value
that is being set. updateTime() was modified to call showTime() after the time
is updated.