Texas Instruments TI-84 - Manual (Page 14)

Chapter 1: Operating the TI-84 Plus Silver Edition 11
Installing New Faceplates Installing New Faceplates Installing New Faceplates Installing New Faceplates
Using the Clock Using the Clock Using the Clock Using the Clock
Use the Clock to set the time and date, select the clock display format, and turn the clock
on and off. The clock is turned on by default and is accessed from the mode screen.
1. Align the top of the faceplate in the
corresponding grooves of the TI-84
Plus Silver Edition case.
2. Gently click the faceplate into
place. Do not force.
3. Make sure you gently press each
of the grooves to ensure the
faceplate is installed properly. See
the diagram for proper groove
placement.