Configuring modbus messaging – Toshiba Tosvert EtherNet/IP - Modbus TCP option IPE002Z User Manual
Page 76
E6581741
- 75 -
10.3. Configuring Modbus messaging
To use Modbus messaging in PL7, the “IP address”, “Subnet mask” and “Gateway
address” parameters must be configured in the “Messaging” tab in the PLC Ethernet
module configuration screen.
Data entered in the “Connection configuration” box is used to manage the PLC Modbus
messaging service, but has no effect on IO Scanning which is an independent service.
Example:
PLC IP address
192.168.1.30
Subnet mask
255.255.255.0
Gateway address
0.0.0.0
Drive IP address
192.168.1.12
Xway address
IP address
Protocol
Access
Mode
1
1,101 192.168.1.12 MODBUS
;
MULTI