Toshiba Tosvert EtherNet/IP - Modbus TCP option IPE002Z - Manual (Page 6)

E6581741
- 5 -
2.2. RJ45 connector pin layout
The EtherNet/IP™ - Modbus ® TCP option is equipped with two shielded RJ45
connectors.
When you use VF-MB1, the shielding is connected to the drive ground. When you use
VF-S15, the shielding is connected to the grounding terminal of option adapter.
Use an STP (shielded twisted pair) Ethernet cable.
The transmission speed is detected automatically by the unit (10 Mbps or 100 Mbps).
The card can operate in half duplex or full duplex mode, whether connected to a hub or a
switch and regardless of the transmission speed (10 Mbps or 100 Mbps).
Pin Signal
1 TD+
2 TD-
3 RD+
4 -
5 -
6 RD-
7 -
8 -
* Fix a cable so that a communication connector may be not taken the weight of wire.
2.3. Example of connection to an EtherNet/IP™ and Modbus
®
TCP
Example of daisy chain topology and star topology
Daisy chain topology Star topology
8………………1
Port L and Port R
Ethernet switch
PLC