Installing the printer on mac os x 10.2.4 or later, Installing the macintosh ppd file – Toshiba ESTUDIO 3511 User Manual

Page 176

176

Printing Guide — Installing Client Software for Macintosh

Multi-Position Stapler and Hole Punch — Select this when the Multi-staple
Finisher or Saddle-stitch Finisher and Hole Punch unit are installed.
Job Separator — Select this when the Job Separator (only for e-STUDIO450
Series and e-STUDIO280 Series) is installed.
Offset Tray — Select this when the Offset Tray (only for e-STUDIO450 Series
and e-STUDIO280 Series) is installed.

NOTE:

•

When you select “Multi-Position Stapler” or “Multi-Position Stapler and Hole Punch”,
the saddle-stitching function will be selectable for printing. However, saddle-stitch-
ing is available only when the Saddle-stitch Finisher is installed.

— Lower Drawer (only for e-STUDIO280 Series)
Not Installed — Select this when the Lower Drawer is not installed.
Installed — Select this when the Lower Drawer is installed.
— Pedestal
Not Installed — Select this when no pedestal is installed.
Pedestal 1 — Select this when the Paper Feed Pedestal is installed.
Pedestal 2 — Select this when the Paper Feed Pedestal and Drawer Module are
installed.
LCF — Select this when the Large Capacity Feeder is installed.
— ADU (only for e-STUDIO280 Series)
Not Installed — Select this when the ADU is not installed.
Installed — Select this when the ADU is installed.