Toshiba ESTUDIO 3511 - Manual (Page 101)

Printing Guide — Installing Client Software for Windows 101
NOTE: • It assumes using SMB printing by Point and Print in a small network. If you can use
the Windows NT 4.0, Windows 2000, Windows XP, or Windows Server 2003 as a
print server, it is recommended to set up for printing via Windows print server. For
further information about setting up printing via a Windows print server, see the Net-
work Administrator’s Guide.
SUPPLEMENTS: • TopAccessDocMon is also available for SMB printing. To install TopAccessDocMon,
you must install it from the Client1 CD-ROM separately.
• The Agfa Font Manager is also available to install and manage the TrueType fonts
on your computer. To install the Agfa Font Manager, you must install it from the
Client1 CD-ROM separately.
— Windows 98/Me
Installing the printer drivers for SMB printing by Point and Print
1.
Open this equipment in the network with Windows Explorer,
and double-click a queue in which the printer driver should
be installed (see below).
pcl5c — Double-click this queue to install the PCL5c printer driver.
pcl6 — Double-click this queue to install the PCL6 printer driver.
ps3 — Double-click this queue to install the PS3 printer driver.
• The Printers dialog box appears.
NOTE: • The “pcl5c” queue is displayed only for e-STUDIO4511 Series.
2.
Click [Yes].
• The Add Printer Wizard dialog box appears.
For e-STUDIO450 Series and e-STUDIO280 Series:
Agfa Font Manager is not included in the Client1 CD-ROM. You must install it from the Font
CD-ROM that comes with the Printer Kit or Printer/Scanner Kit.