Output Solutions 650 - Manual (Page 59)

Maintenance
4.1.2 Remove the Alignment Unit
• Power the printer off
• Open the Top Cover
• Swivel the green print unit lift handle (see the photo on the page before) backwards to lift
the print unit entirely.
• Press both Levers (2) to the outside of the printer
• Swivel the Alignment Unit up to about 45°. Now the Pins (3) on both sides of the
• Alignment Unit (1) are in the correct position.
• Lift the Alignment Unit (1) out of the printer.
Note:
Both pins (3) are flatten and so it is only possible to take out the Alignment Unit in
an angle of 45°!
4-3