Output Solutions 650 - Manual (Page 38)

Configuring the Printer
3.4.4 IBM CONFIGURE
The following items can be modified according to the IBM parameters.
Note:
In the different emulations the items shown are not equal. The option’s which are
printed in bold indicate the actual setting.
IBM CONFIGURE
Parameter Option Explanation Note
EMULATION IBM X24
IBM PPII
Select your printer
emulation
AGM NO
YES
NO = ignore AGM graphic
printing
YES = AGM graphic
printing is active AGM is only for IBM
X24 printers valid.
HIGH SPEED PRINTING YES
NO
A4 SHEET
FANFOLD PAPER
Selecting high speed
printing mode.
NO = no draft mode.
A4 SHEET = always draft
mode when the paper is A4
Sheet.
FANFOLD PAPER =
always draft mode when the
paper is fanfold paper.
YES: = the print mode
always is draft.
CPI 10
12
15
17.1
20
Defines the number of
characters printed per inch.
LPI Defines the number of lines
printed per inch.
CHARACTER DEFINITION DRAFT
LQ
Selecting the printing
quality.
LF+CR NO
YES
YES: LF = LF + CR
NO: LF = LF
CR+LF NO
YES
NO: CR = CR
YES: CR = CR + LF
LEFT MARG. (1/60") 0
-6 up to +6
To adjust the left margin
more to left or right in units
of 1/60" inch (about 4 mm).
TOP MARG. (1/60") 0
-6 up to +6
Adjust the top margin in
units of 1/60 inch (about
4 mm). TOF = Top Of Form
3-10
5
6