Output Solutions 650 - Manual (Page 12)

Getting Started
1.2 Requirements to the Location of the Printer
Environmental Conditions
This printer is designed to be installed in a typical office environment. We claim that
customer must follow these operation explanation as below for printer’s well working
status and safety of operator:
• Install the printer in an area away from any heat source, air conditioner, or strong
airflow.
• Avoid installing the printer where it is exposed to moisture or heat (eg. direct sunlight).
• Avoid installing the printer in a dusty or humid environment.
• Do not put printer to the high temperature, shake or wet environment. And no exposure
to direct sunlight. For example boiler, humidifier or fridge.
• Position the Printer on a stable level surface.
Preconditions for Installation
• Place the printer on the stand or a table.
• When processing fanfold paper always place the printer with its front edge slightly off
the edge of the table.
Power Requirements
• No special wiring is required. A typical office wall outlet is sufficient. Make sure that the
electrical wall outlet to which the printer is connected has a valid ground and that it is
able to supply the power needed by the machine.
• Do not plug into the same wall outlet other equipment besides the printer such as
coffee machines, copy machines, or air conditioners.
1-2