Output Solutions 650 - Manual (Page 15)

Getting Started
1.5 Ribbon Installation
• Take out the Ribbon Cassette (1) from plastic wrapping
Details of the Ribbon Cassette (1):
• Active Wheel (2)
• Fixation Pin (3)
• Fixation Block (4)
• Ribbon (5)
• Ribbon Guide (6)
Installing:
• Power the printer on.
• Remove the Ribbon Guide (6) by sliding down from the Ribbon Cassette (1).
• Open top cover.
• Swivel the green print unit lift handle (9) backwards to lift the print unit entirely.
• Move print head (10) to the centre.
• Insert the fixation pins (3) at the both ends of ribbon cassette (1) into the slots (11) at
both ends of print unit frame.
• Try to push ribbon cassette (1) by rotation as shown in the picture above.
• Press the ribbon cassette fixation block (4) into both ends slot of print unit until you
hear a “CLICK”.
1-5