Output Solutions 650 - Manual (Page 29)

3. Configuring the Printer
Main Functions and Entry Points into the Menu
The following Main Functions are available:
• Menu Setup
With this function you are able to modify the parameters of the printer configuration.
For a detail information look at paragraph 3.4.
• Menu Printing
Printout of the Printer ID, a Needle Test and the parameter setting of the three Macros.
For a detail information look at paragraph 3.2.
• Printing Test
The printing of User’s Guide, ASCII character set, character attributes, Dr. Grauert
(print a letter). For a detail information look at paragraph 3.5.
• Adjustment
Printing current photosensor parameters, reset photosensor parameters and printing;
adjust left margin, top margin and bi-direction printing, run-in printing, inquire
photosensor value, reset hardware parameters. For a detail information look at
paragraph 3.6.
• Debug / Test
Hex printing (include: data backup, printing backup data, directly dump), magnetic stripe
operation (include read and write). For a detail information look at paragraph 3.7.
• Info Inquiring
Inquiry the current setting parameters of software or hardware, including a version
(version number, special version tag, special emulation, FPGA Version, etc.), hardware
configuration (character’s generators, optional interface, scanner, sprockets), printer
ID. For a detail information look at paragraph 3.8.
3-1