Output Solutions 650 - Manual (Page 18)

Getting Started
The operator can press down front power switch (3 in figure before) to power on printer
now.
After power on:
• The ON (1) indicator will be light up
• After a short delay the READY (2), STATION 1 (3), and STATION 2 (4) indicator will
be all lighted.
• Several seconds later the print head start initialization action. You hear a sound of the
movement.
• Only ON indicator will be light after initialization has been finished.
Note:
Any printing medium in the printer paper path will be ejected.
The display shows the message: CX LQ
ON-LINE
The informations shown by the LCD are either factory default or related to the selected
micro.
1-8