Output Solutions 650 User Manual
Page 36
Configuring the Printer
CONFIGURE
Parameter Option Explanation Note
SPECIAL FORMS NO
YES
YES reduce the speed of
paper handling, and add
some special management
to support special forms,
e.g. thin paper, paper with
different thickness.
BIM DIRECTION
UNIDIRECTION
Select printing direction for
graphics.
NEEDLE COMPENSATION NO
YES
Select needle
compensation or not when
the needle is broken.
Needle Position
HS COMPENSATION NO
YES
Select heigh speed
compensation or not
Only displayed if
NEEDLE
COMPENSATION
is set to YES
BROKEN NEEDLE NO. 1
up to
24
Choose the one needle
from needle 1 up to needle
24 for compensation.
Only displayed if
NEEDLE
COMPENSATION
is set to YES
PNS SELECTION
YES
Whether the following PNS
items are valid or not.
PNS #2000K SINGLE SHEET
205 mm
220 mm
The selection will influence
the ejection of the paper.
Single Sheet means A4
Only displayed if PNS
SELECTION
is set to YES
3-8