Output Solutions 650 - Manual (Page 49)

Configuring the Printer
3.6.5 BIDIRECTIONAL ALIGNMENT ADJUSTMENT
After selecting the Bidirectional Alignment it is possible to align the printing of vertical
lines.
Key or action Two line display
Select Adjustment ADJUSTMENT
PHOTOSENSOR VALUE
[COMPRESS –]
until the LCD shows:
ADJUSTMENT
BIDIRECTION ALIGN
[STOP #] to select
The yellow Ready and green Station 2 lamp lights up.
BIDIRECTION ALIGN
RESULT OF ALL SPEED
Press the [STOP #] key BIDIRECTION ALIGN
INSERT A4 SHEET
BIDIRECTION ALIGN
The printer starts printing vertical lines after inserting a paper. BIDIRECTION ALIGN
FINISH; PRESS STAT2
[STATION 2] BIDIRECTION ALIGN
RESULT OF ALL SPEED
Now press [FEED/EJECT •] or [COMPRESS –] until you can select the
font and CPI which you want to align (e.g. DRAFT 12 CPI).
BIDIRECTION ALIGN
DRAFT 12CPI
Press the [STOP #] key to accept the selection. BIDIRECTION ALIGN 000
• = LEFT – = RIGHT
Use the [FEED/EJECT •] or [COMPRESS –] key for alignment (e.g. left
5 times). If you are going to the right the numeric value will be indicated by
an minus sign (e.g. -005).
BIDIRECTION ALIGN 005
• = LEFT – = RIGHT
Insert an A4 sheet and the printer starts a control print of your selection.
BIDIRECTION ALIGN 005
• = LEFT – = RIGHT
Now you can select an other font for alignment or leave the function. BIDIRECTION ALIGN
DRAFT 12CPI
If you want to leave the off-line mode press [STATION 2] and
[COMPRESS –] together.
SAVE PARAMETERS
# ACCEPT ST2 = IGNORE
*) The displayed line is depending on the selected emulation.
3-21
Because the parameters are saved, press [STATION 2] to ignore.
CX LQ1600K
ON-LINE
Press the [STOP #] key to accept and save your selection.
DRAFT 12CPI
SAVE PARAMETERS