Output Solutions 650 - Manual (Page 14)

Getting Started
1.4 Remove Transport Lock
Note: Please do not connect the printer's power cord at this moment, otherwise the
printer may be damaged permanently.
• Open the top cover (1) first.
• Remove the black iron clip (2) and yellow label, from the print head carriage.
• Take out the four foam-rubber cushions (3) which on the both sides of carriage.
• Remove the foam-rubber cushions (4) to the front by lifting up.
Remove all transport
Re-packing Information
To ensure maximum protection when transporting the printer, always:
• Remove the mains cable.
• Remove the ribbon cassette.
• Reposition the transport lock.
• Pack the printer in its original packing material and ship in its original package.
1-4