Ricoh Network Guide - Manual (Page 57)

LDAP Server Settings
51
2
To finish programming/changing the
LDAP Server
A
Press [Change] after setting each item.
BBBB
Press [Exit].
CCCC
Press [Exit].
D
Press the
{User Tools/Counter/Inquiry}
key.
To delete the programmed LDAP
server
AAAA
Press [Delete].
BBBB
Select the LDAP server you want
to delete.
CCCC
Press [Yes].
Programming the LDAP Server
To enter an identification name
Register a name for the LDAP server
that will appear on the server selection
screen of the LDAP search operation.
AAAA
Press [Change] under [Identification
Name]
.
B
Enter the server’s identification name.
CCCC
Press [OK].
To enter a server name
Register the LDAP server’s host name
or IP address.
AAAA
Press [Change] under [Server Name].
BBBB
Enter the LDAP server name.
CCCC
Press [OK].