Setting up the machine on a network, Printer/lan-fax, E p.14 “setting up the ma- chine on a network – Ricoh Network Guide User Manual
Page 20: Ee p.14 “setting up the ma- chine on a network, 2setting up the machine on a network
Connecting and Setting Up
14
2
Setting Up the Machine on a Network
This section describes the network settings you can change with User Tools (Sys-
tem Settings). Make settings according to functions you want to use and the in-
terface to be connected.
Important
❒ These settings should be made by the systems administrator, or after consult-
ing with the systems administrator.
Reference
For details about settings, see p.37 “Interface Settings”
❖ Viewing the Information Displayed in the List
$ These items must be set to use the function. Be sure to set them before at-
tempting to use the corresponding function.
❍ These items must be set if required.
Printer/LAN-Fax
Interface
Settings
Ethernet
Interface Settings/
Network
See p.37 “Network”.
IP Address
$
Gateway Address
❍
DNS Configuration
❍
DDNS Configuration
❍
Domain Name
❍
WINS Configuration
❍
NW Frame Type
❍
LAN Type
$
Ethernet Speed
❍
$
SMB Computer Name
❍
SMB Work Group
❍
Permit SNMP V3 Communication
❍
Permit SSL / TLS Communication
❍
Host Name
❍
Machine Name
❍