Roland SD-50 - Manual (Page 80)

80
Controlling DAW Software
When the SD-50 is connected to your computer, you can use the SD-50 to control your DAW software. For example,
you can press the SD-50’s [
] button to play a song in your DAW software.
fig.connect-MIDI-Cont_e.eps
The MIDI messages transmitted from the SD-50 are compatible with Mackie Logic Control.
As described in the owner’s manual of your DAW software, set your DAW software so that it can be controlled by the
following MIDI messages.
Button operation Transmitted MIDI message
[ ] button Press 90 5D 00 Release 90 5D 7F
[ ] button Press 90 5E 00 Release 90 5E 7F
[ ] button Press 90 5B 00 Release 90 5B 7F
[ ] button Press 90 5C 00 Release 90 5C 7F
Hold down the [EXT] button and
turn the [VALUE] dial
Clockwise B0 3C 01 Counterclockwise B0 3C 41
Computer
SD-50 MIDI Signal flow
Press
SD-50_e.book 80 ページ ２０１０年１月２５日 月曜日 午前１０時５２分