Roland SD-50 - Manual (Page 29)

29
Installing the Driver
8. When the “Ready to install the driver” message appears, use a USB cable to
connect the SD-50 to your computer.
fig.xpdrv4-e.eps_27
If any other message appears, proceed as directed by the message.
9. Switch on the SD-50’s power (p. 20).
The indication “Found New Hardware” will appear in the lower right corner of your screen.
* It may take several minutes for the “Found New Hardware Wizard” to appear.
10. If you are asked whether you want to connect to Windows Update, choose [No, not this time] and
click [Next].
fig.xpwupd-e.eps
11. Choose [Install the software automatically (Recommended)], and click [Next].
fig.xpdrv6-e.eps
Operation of the SD-50
Operation of the SD-50
SD-50_e.book 29 ページ ２０１０年１月２５日 月曜日 午前１０時５２分