Roland SD-50 - Manual (Page 51)

51
Using the SD-50 as a MIDI Sound Module
You can specify the pan (stereo position) of each part, and adjust the depth of the reverb and chorus effects for each
part.
1. Press the [PART] button a number of times to access the Part Edit screen.
page_part_edit-1.eps
2. Turn the [VALUE] dial to select the effect whose settings you want to adjust, and then press the
[ENTER] button.
page_part_edit-3.eps
3. Turn the [VALUE] dial to adjust the setting.
The pan and effect settings you specify will be saved in internal memory if you save the studio set (p. 54).
Adjusting the Pan and Effect Depth
Setting Value Explanation
Pan 0–127 Left/right balance of the sound.
Reverb Send 0–127 Depth of reverb. Choose “0” if you don’t want to apply reverb.
Chorus Send 0–127 Depth of chorus. Choose “0” if you don’t want to apply chorus.
SD-50_e.book 51 ページ ２０１０年１月２５日 月曜日 午前１０時５２分