Formatting usb memory (usb mem format), P. 76 – Roland SD-50 User Manual
Page 76
76
Utility Functions
3.
Press the [ENTER] button.
The following screen will appear.
Restore-dialog.eps
To cancel without restoring, press the [EXIT] button.
4.
To execute the restore operation, press the [ENTER] button.
When the restore is completed, the following screen will appear.
page_power_off.eps
5.
Turn the SD-50’s power off, then on again.
Here’s how to format USB memory.
If the USB memory contains important data, be aware that formatting USB memory will cause all data saved on
that USB memory to be lost.
1.
Connect your USB memory device to the SD-50.
2.
In the utility screen, select “USB Mem Format.”
page_util-foramt.eps
3.
Press the [ENTER] button.
The following screen will appear.
formar-dialog.eps
To cancel without formatting, press the [EXIT] button.
4.
To execute the format operation, press the [ENTER] button.
When formatting is completed, the following screen will appear.
page_util-for-comp.eps
Formatting USB Memory (USB MEM FORMAT)
SD-50_e.book 76 ページ ２０１０年１月２５日 月曜日 午前１０時５２分