Roland SD-50 - Manual (Page 34)

34
Installing the Driver
8. In the next screen, click [Continue Installation].
9. When installation is completed, click [Restart] to restart your computer.
* It may take some time for your computer to restart.
10. Switch off the SD-50’s power (p. 22).
11. When your computer has restarted, use a USB cable to connect the SD-50 to
your computer.
12. Switch on the SD-50’s power (p. 22).
In order to use the SD-50 with your software, you’ll need to select the SD-50 as the audio input/output device (p. 35)
and MIDI input/output device. For details on how to do this, refer to the documentation for your software.
Audio input/output device settings
* If you’re unable to select the SD-50 as the audio input/output device in your software, it may be that a problem has
occurred. Refer to “Problems with Settings” (p. 94) in the Troubleshooting section.
Input/Output Device Settings
Audio output device SD-50 44.1kHz
Audio input device SD-50 44.1kHz
Operation of the SD-50
Operation of the SD-50
Operation of the SD-50
SD-50_e.book 34 ページ ２０１０年１月２５日 月曜日 午前１０時５２分