Ricoh 4016 Series - Manual (Page 165)

O THER W AYS TO F AX 5.2
Redialling
To redial the number last called:
Press Redial/Pause. If a document is loaded in the ADF or on
the document glass, the machine automatically begins to send.
To search through Redial memory:
1 Press and hold Redial/Pause for about 2 seconds.
The Redial memory in your machine retains the last 10
numbers called. If you have dialled the same number
multiple times, the machine does not count the duplicates.
2 Press or to search through the memory until you see
the number you want on the display.
3 Press Start or Mode/Enter to dial. If a document is loaded
in the ADF, the machine automatically begins to send.
N OTE : For documents scanned from the document glass, the
display asks if you want to scan another page. Select “1.YES” to
add another page, otherwise select “2.NO”.
Delayed Transmission
You can set your machine to send a fax at a later time when you
will not be present.
1 Feed the document(s) face up into the ADF.
Or
Place a single document on the document glass face down.
2 Adjust the document settings if necessary. For details, see
“Adjusting Document Settings” on page 2.4.