Ricoh 4016 Series - Manual (Page 145)

S ENDING A F AX 2.6
Contrast
1 Use Contrast to compensate for the brightness or darkness
of your faxed document.
2 By pressing Contrast repeatedly or using the navigation
keys, you can choose from 5 contrast levels.
Set to darker mode when the document contains faint
pencil markings or light print.
Set to lighter mode for dark print.
3 When the desired level is displayed, press Mode/Enter to
save the selection.
Sending a Fax Automatically
1 Feed the document(s) face up into the ADF.
Or
Place a single document on the document glass face down.
2 Make sure that Fax mode is selected. Press Mode/Enter to
change the mode into the Fax mode. In the Fax mode, the
display shows:
3 Adjust the document settings if necessary. For details, see
“Adjusting Document Settings” on page 2.4.
4 Enter the remote fax phone number using the number
keypad.
5 Press Mode/Enter or Start.