Ricoh 4016 Series - Manual (Page 142)

S ENDING A F AX 2.3
2
3 Make sure that the machine is in the Fax mode. If
necessary, press Mode/Enter to change the mode into the
Fax mode. In the Fax mode, the display shows:
4 You can adjust the following document settings to suit your
fax needs (see page 2.4):
•Resolution – to select resolution.
•Contrast – to adjust contrast.
5 Use the number keypad to dial the number of the remote
fax machine.
6 Press Start or Mode/Enter.
To fax a document from the document glass:
1 Open the document cover.
2 Place the document face down on the document glass, and
close the document cover.