NEC 320Fc - Manual (Page 97)

Viewing Active Upgrade Process Status
Performing the Upgrade 4-27
Related Topics
• “Activity Log” on page 4-21
• “Saving the Activity Log to a File” on page 5-1
• Troubleshooting
Table 4-6. Status: Partner State
Partner State Description
DC On The partner operating system is shut down, but system power
is still on.
DC Off The partner operating system is shut down and system power
is off (but the system still has housekeeping power).
BIOS POST The partner system is performing a BIOS Power On Self Test
(POST).
Hung: BIOS POST The partner system hung in the BIOS POST.
OS Booting The partner operating system is booting.
Hung: OS Booting The partner system hung in the boot process.
OS Up The partner operating system is up. (However, the system
might not be available for use until other system resources
finish loading.)
Hung: OS Up The partner operating system is hung.
OS Rebooting The partner operating system is rebooting.
Hung: OS Rebooting The partner system hung while rebooting.
OS Shutting Down The partner operating system is shutting down.
Hung: OS Shutting Down The partner system hung while the operating system was
shutting down.
State Sensitive Recovery:
NMI issued The partner operating system has crashed.
State Sensitive Recovery:
Reset The system controller is performing a hard reset of the partner
system.