NEC 320Fc - Manual (Page 35)

Pre-Upgrade Tasks
Preparing for the Active Upgrade Process 2-13
Java Runtime Environment is necessary for running Active Upgrade.
Install the following Java Runtime Environment:
Sun Microsystems Java™ Runtime Environment Version 5.0
Update 8 (1.5.0_08) or later
Installing Java Runtime Environment
IP addresses must be configuredin VTM to run Active Upgrade.
Configure IP addresses in VTM as described in this section.
IMPORTANT
The following IP addresses must be configured in VTM.
192.168.1.1
192.168.1.2
192.168.1.3
192.168.1.4
192.168.1.5
If the address specified in the network adapter and VTM is the same, the active
Upgrade process does not run properly. If the IP addresses above are the same as
the ones in the network adapter, be sure to change the IP addresses specified in
VTM by performint the following
“Changing VTM IP Address Information” before
performing the procedure described in “Configuring IP Address in VTM.”
Configuring IP address in Virtual Technician Module (VTM)
Log on as an administrator or member of Administrators group, and change the IP
addresses specified in VTM using the following procedures.
1. Open C:\Program Files|ftsys|VTM in Windows Explorer, and open the
VTMNETConfig.vbs file by clicking Edit after right-clicking the
VTMNetConfig.vbs file.
Changing VTM IP address