NEC L320 - Manual (Page 73)

3-30 Using the BIOS Setup Utility
4. Use the arrow keys to highlight the “Display BIOS Version” option on the Main
Menu. Use this option to check the currently installed BIOS version and the
version of the new replacement BIOS.
Press any key to return to the Main menu.
5. Highlight the “Install New BIOS” option and press Enter .
6. Press Y and then press Enter . After a brief pause, a message appears telling you to
remove the diskette from the file bay drive.
7. Remove the diskette and press any key to continue. The utility updates the BIOS.
Power off your computer. The next time you power on your computer, you will
have the latest NEC Versa L320 computer BIOS revision level.
8. Power on your computer. A CMOS Checksum message appears and prompts you
to press
F2 to enter Setup.
9. Press F2 to enter Setup and restore the default parameter settings.
10. Reconfigure Setup with the custom settings you documented for yourself before
beginning this procedure.
11. Press F10 to save changes and exit Setup.