NEC L320 - Manual (Page 105)

Using the System Drives and Bays 5-11
Note Software and drivers for the DVD-ROM drive are provided separately on a
CD. Printed installation instructions are packaged with the CD.
DVD-ROM drive features
A – DVD-ROM Drive C – Emergency Eject Hole
B – DVD-ROM Drive Status LED D – Disc Eject Button
Combination CD-RW and DVD-ROM Drive
Your system might come with a combination CD-RW and DVD-ROM drive. Use the
drive to load and start programs from a compact disc (CD) or to play your audio CDs,
write information to a CD, or play digital video discs (DVDs).
The CD-RW/DVD-ROM combination drive offers the following features (see the
following figure).
T Status LED — Lights during data read operations. Do not eject the disc or turn off
the NEC Versa notebook when the indicator is lit.
T Emergency Eject Hole —Allows you to manually remove a disc from the
CD-RW/DVD-ROM drive if the eject function is disabled by software or a power
failure.
To remove a disc, insert the end of a paper clip into the eject hole, and push in until
you hear a click. Manually open the drawer.
T Eject Button — Ejects the tray. Press this button when power is on to insert a disc
into or remove a disc from the drive.
Note CD-RW media must be formatted before you use it. Systems with CD-RW
drives ship with an NEC CD-RW Software CD. Install the software on your system from
this CD (see “NEC CD-RW CD” in Chapter 4.)