NEC L320 - Manual (Page 68)

Using the BIOS Setup Utility 3-25
Recognizing the Windows Power Management States
It is important to recognize your system’s behavior when in each of these power
management states. The following table describes the system behavior for each power
management state.
Windows Power Management Behavior
LCD Timeout Standby (STR) Hibernate (STF)
Default
Setting 2 Minutes, DC power.
15 Minutes, AC power.
5 Minutes, DC power.
20 minutes, AC power.
On DC power:
15 minutes for
Windows 98SE;
10 minutes for
Windows 2000.
On AC power:
60 minutes for
Windows 2000 and
Windows 98SE
Manually
Invoke Close LCD panel. Go to Start, Shutdown,
Standby.
Close LCD panel.* Close LCD panel.*
Press Power button.*
System
behavior LCD panel is blank.
Status LED lights
green.
LCD panel is blank.
Status LED blinks green.
LCD panel is blank.
Status LED turns off.
Progress bar indicates that
current working
environment is saved to
hard disk.
Resume Press any key. Press Power button. Press Power button.
Progress bar appears
during process.
*Only when set in Advanced Windows Power Management Properties.