NEC L320 - Manual (Page 56)

Using the BIOS Setup Utility 3-13
Power Menu
Use the Power menu to control some power saving functions in your system.
Note that the Advanced Configuration and Power Interface (ACPI) controls most
power management functions of Versa L320 systems running the Windows 98 SE or
Windows 2000 operating system. In Windows 98 SE, ACPI is configured through the
Power Management Properties dialog box. In Windows 2000, ACPI is controlled
through the Power Options Properties dialog box.
For details about ACPI power management, see the section, “Managing System
Power,” later in this chapter.
See the following information on using the Power menu to balance high performance
and energy conservation in your system.
Power Menu
Parameter Default Setting Alternate Setting(s)
Power Switch On/Off Suspend/Resume
Power Management
Function Always On Battery Only
Power Savings Level Customized Disabled,
Maximum Power Savings,
Maximum Performance
Suspend Timeout 20 minutes 5, 10, 15, 30, 40, 60 minutes, Off
Suspend Mode Suspend Save-to-Disk
Auto Save-to-Disk Off After 1 Hour
Suspend Warning Tone Enabled Disabled
Intel® SpeedStep2™
technology Enabled Disabled
Lid Switch Backlight Suspend
Remote Power On Disabled AC Only, AC/Battery
Resume On Modem Ring Off On
Resume On Time Off On
Resume Time [HH:MM:SS]