NEC L320 - Manual (Page 17)

Introducing the NEC Versa 1-7
T Use the Power button in the following ways:
— Press the Power button to power on.
— Press the Power button to resume from a Windows 98 or Windows 2000
Standby mode and proceed with normal operation.
— Hold the Power button in place for 4 or more seconds to initiate power override
(powers off the system). Only use this option if you cannot power off your
system using Start, Shutdown.
Shortcut Buttons
Some systems have shortcut buttons that you can configure to launch your default
Internet browser and your default e-mail application. See “One-Touch Start Button
Settings Utility” in Chapter 4 for information about configuring the buttons.
Status LEDs
The NEC Versa L320 system uses status lights marked with icons to communicate
power status and operating status. Most of these LEDs are on the control panel (see the
following figure). See the following sections for information about each LED.
Control panel LEDs
A – Power LED F – Caps Lock LED
B – Battery Status LED G – Scroll Lock LED
C – E-mail Notification LED H – Num Lock LED
D – Drive Activity LED I – Security Indicator LED
E – NEC Modular Bay Drive Activity LED