Changing the auto play setting – NEC L320 User Manual
Page 103
Using the System Drives and Bays 5-9
Avoid using benzene, paint thinner, record cleaner, static
repellent, or any other chemical on the disc. Chemicals and cleaners can damage the
disc.
Changing the Auto Play Setting
Your system’s shipping configuration may not allow a CD to automatically play upon
insertion. Although this feature makes using your CDs very convenient, it may interfere
with the system’s power management function.
Follow these instructions to enable or disable the Auto play feature.
1.
Press the Start button, select Settings and Control Panel.
2.
In the Control Panel, highlight and double-click the System icon.
3.
Select the Device Manager tab.
4.
Locate and open the CD-ROM folder.
5.
Highlight the appropriate CD-ROM line.
6.
Press the Properties button at the bottom of the window and select the Settings tab.
7.
Proceed as follows:
T
To enable Auto Play, click to add a check mark next to the line “Auto insert
notification.”
T
To disable Auto Play, click to remove the check mark next to the line “Auto
insert notification.”
8.
Select OK twice to accept the settings in the Settings tab and exit the Properties
window.
9.
To activate the new setting, reboot the system when prompted.