NEC L320 - Manual (Page 50)

Using the BIOS Setup Utility 3-7
T Diskette Drive — Designates the drive type for your diskette drive.
T Internal Drives — Assigns devices to the internal drives in your system.
T VersaBay — Assigns the device to the VersaBay drive in your system.
T System Memory / Extended Memory — Displays the amount of system memory
and extended memory currently installed in your system.
T CPU Type, CPU Speed — Displays the type and speed of the installed processor.
T BIOS version — Displays the version number of the current BIOS Setup utility.
Advanced Menu
Use the Advanced menu to set the following functions.
Advanced Menu
Parameter Default Setting Alternate Setting(s)
NumLock on Boot LockOff LockOn
PS/2 Mouse Auto Both, Disabled
LCD Panel View Expansion Enabled Disabled
BootUp Message Enabled Disabled
Save to Disk Warning Disabled Enabled
Summary Screen Disabled Enabled
Silent Boot Enabled Black, Disabled
Wireless Device Disabled Enabled
I/O Device Configuration [Enter]
T NumLock on Boot — Specifies whether NumLock is enabled when the system
boots.
T PS/2 Mouse — Auto allows the PS/2 mouse to be active if it is detected. Both
allows the NEC VersaGlide touchpad and an external mouse to be active at the
same time. Disabled turns off the internal mouse and prevents an external mouse
from being active. (When set to Disabled, IRQ12 is freed up.)
T LCD Panel View Expansion — Specifies whether the panel view is reduced/off or
expanded/on.