7. terminating fastbuild utility – NEC Disk Array Controller N8103-89 User Manual
Page 114
94
2-7. Terminating FastBuild Utility
1.
Press the [Esc] key to return to the Main Menu.
2.
If you press [Esc] on the Main Menu, the message asking you whether FastBuild
Utility may be terminated appears.
System is going to REBOOT!
Are You Sure?
Y – Reboot / Any key - Back
3.
To terminate FastBuild Utility, press [Y] to reboot the server or turn off the power.
If not, press any key (such as [Esc]) to cancel the termination.