Nortel Networks Mediant TP-1610 SIP - Manual (Page 84)

Mediant 2000 SIP
Mediant 2000 SIP User’s Manual 84 Document #: LTRT-72504
5.12 Save Configuration
The Save Configuration screen enables users to save the current parameter configuration and
the loaded auxiliary files to the non-volatile memory so they are available after a power fail.
Parameters that are only saved to the volatile memory revert to their previous settings after
hardware reset.
Note that when performing a software reset (i.e., via Web or SNMP) you can choose to save the
changes to the non-volatile memory. Therefore, there is no need to use the Save Configuration
screen.
Note: Saving changes to the non-volatile memory may disrupt traffic on the gateway.
To avoid this, disable all traffic before saving.
To save the changes to the non-volatile, take these 2 steps:
1. Click the Save Configuration button on the main menu bar; the ‘Save Configuration’ screen
is displayed.
Figure 5-37: Save Configuration Screen
2. Click the Save Configuration button in the middle of the screen; a confirmation message
appears when the save is complete.