Nortel Networks Mediant TP-1610 SIP - Manual (Page 48)

Mediant 2000 SIP
Mediant 2000 SIP User’s Manual 48 Document #: LTRT-72504
• [2,3,4]xxx# represents four-digit numbers that start with 2, 3 or 4
• 54324 represents any number that starts with 54324
• 54324xx# represents a 7 digit number that starts with 54324
• 123[100-200]# represents all numbers from 123100 to 123200.
The VoIP gateway matches the rules starting at the top of the table. For this reason, enter more
specific rules above more generic rules. For example, if you enter 551 in entry 1 and 55 in entry
2, the VoIP gateway applies rule 1 to numbers that starts with 551 and applies rule 2 to numbers
that start with 550, 552, 553, 554, 555, 556, 557, 558 and 559. However if you enter 55 in entry 1
and 551 in entry 2, the VoIP gateway applies rule 1 to all numbers that start with 55 including
numbers that start with 551.
5.8.3.2 Numbering Plans and Type of Number
Numbers are classified by their Numbering Plan Indication (NPI) and their Type of Number
(TON). The Mediant 2000 supports all NPI/TON classifications used in the standard. The list of
ISDN ETSI NPI/TON values is shown as follows:
Table 5-2: NPI/TON Values for ISDN ETSI
NPI TON Description
Unknown [0] Unknown [0]
A valid classification, but one that has no information about the
numbering plan.
Unknown [0]
A public number in E.164 format, but no information on what
kind of E.164 number.
International [1]
A public number in complete international E.164 format. For
example: 16135551234
National [2]
A public number in complete national E.164 format. For
example: 6135551234
E.164 Public [1]
Subscriber [4]
A public number in complete E.164 format representing a local
subscriber. For example: 5551234
Unknown [0]
A private number, but with no further information about the
numbering plan
Level 2 Regional [1]
Level 1 Regional [2] A private number with a location. For example: 3932200
PISN Specific [3]
Private [9]
Level 0 Regional (local) [4] A private local extension number. For example: 2200
For NI-2 and DMS-100 ISDN variants the valid combinations of TON and NPI for calling and
called numbers are (Plan/Type):
• 0/0 - Unknown/Unknown
• 1/1 - International number in ISDN/Telephony numbering plan
• 1/2 - National number in ISDN/Telephony numbering plan
• 1/4 - Subscriber (local) number in ISDN/Telephony numbering plan
• 9/4 - Subscriber (local) number in Private numbering plan