Vlan workgroup summary, Vlan workgroup summary -45 – Nortel Networks 450 User Manual
Page 71
BayStack 450 10/100/1000 Series Switches
302401-D Rev 00
1-45
Figure 1-29.
VLAN Port Configuration Screen Example
VLAN Workgroup Summary
This section summarizes the VLAN workgroup examples discussed in the
previous sections of this chapter.
, switch S1 (a BayStack 450 switch) is configured with
multiple VLANs:
•
Ports 1, 6, 11, and 12 are in VLAN 1.
•
Ports 2, 3, 4, 7, and 10 are in VLAN 2.
•
Port 8 is in VLAN 3.
Because S4 does not support 802.1Q tagging, a single switch port on each switch
must be used for each VLAN (see “
VLANS Spanning Multiple Untagged
VLAN Port Configuration
Unit: [ 1 ]
Port: [ 8 ]
Filter Tagged Frames: [ No ]
Filter Untagged Frames: [ No ]
Filter Unregistered Frames: [ No ]
Port Name: [ Student port ]
PVID: [ 3 ]
Port Priority: [ 0 ]
Tagging: [Untagged Access]
Use space bar to display choices, press
Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.
kombk.book Page 45 Tuesday, June 29, 1999 3:25 PM